Digicom SHDSL Bedienungsanleitung PDF herunterladen (Seite 8)

MICHELANGELO SHDSL VPN Firewall Bridge/Router

Chapter 3: Basic Installation

Any TCP/IP capable workstation can be used to communicate with or through

the router. To configure other types of workstations, please consult the

manufacturer’s documentation.

Chapter 3: Basic Installation

The router can be configured with your web browser. A web browser is included as a standard application in

the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides an

easy and user-friendly interface for configuration.

Please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must

be installed. If not, please refer to your Windows-related or other operating system manuals.

There are ways to connect with the router, either through an external repeater hub to the router or directly

connecting with PCs. However, to be sure PCs have an Ethernet interface installed properly prior to connecting

to the router device. You ought to configure your PCs to obtain an IP address through a DHCP server or a

fixed IP address that must be in the same subnet as the router. The default IP address of the router is

192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same subnet, and

have an IP address in the range of 192.168.1.1 to 192.168.1.253). The best and easiest way is to configure the

PC to get an IP address automatically from the router using DHCP. If you encounter any problem accessing

the router’s web interface it may also be advisable to uninstall any kind of software firewall on your PCs, as

they can cause problems accessing the 192.168.1.254 IP address of the router. Users should make their own

decisions on how to best protect their network.

Please follow the steps below for your PC’s network environment installation.

Connecting Your Router

1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE LED are lit.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

Keine Kommentare

Digicom SHDSL Bedienungsanleitung Seite 8